Close Coupled Pump Motor
Need Help Choosing One of Our Products?

1 (800) 417-6568

Close Coupled Pump Motor

$183.50
In stock
SKU
ccpm

Definite Purpose Product Overview

Three phase, enhanced performance closed coupled pump motors. Cast aluminum 215JM/JP and below, cast iron 254JM/JP and above, EPAct rated. Features a multi-mount arrangement incorporating bolt on feet and flange mount configuration. 2 and 4 pole, 1 to 50HP.
 

Basic Specifications

  • Power Ratings from 1 to 50HP
  • Three Phase, 2 and 4 Pole, 60Hz (Useable at 50Hz)                                                                    
  • 230/460V & 575V 60Hz         
  • Totally Enclosed Fan Cooled (TEFC)

Standard Features

  • Removable Feet F1, F2, F0 field convertible 
  • 1.25 Service Factor with 60Hz operation
  • 24 month warranty
  • Conduit Box is 90 degrees rotatable         
  • CSA Certified for Class I, Division II, Groups A, B, C and D / Class I, Zone 2, Groups IIC, IIB, IIA
  • Anti-microbial (tropicalization) on stator winding
  • Regreasable bearings 254JM/JP frame and larger
  • Shear stabalized polyurea grease
  • 1045 steel shaft
  • Surface finish: Alkyd enamel RAL7024 - Graphite Gray
  • Surface treatment: Black oxide under coat for increased corrosion resistance (aluminum models only)      
  • Stainless steel nameplate
  • Corrosion Resistant Hardware
  • Ultra high strength, reusable lifting straps included
    wth motors 254JM/JP frame and larger      

Operating Parameters

  • Continuous (S1) duty
  • Ambient temperatures up to 40 degrees C
  • Installation up to 1000 MASL (3300ft)         

Connection

Up to and including 215JM/JP frame:

  • 9-Lead 230V parallel-wye / 460V series-wye connection 
  • 3-Lead 575V wye connection

254JM/JP frame and larger:

  • 12-Lead 230V parallel-delta / 460V series-delta connection 
  • 6-Lead 460V or 575V single voltage delta connection

Ingress Protection

The standard degree of enclosure protection is IP55 (increased IP protection is available). Both drive end and non-drive end are fitted with double lip oil seals, including a rubber shaft slinger on the drive end. Conduit box lid is sealed with a fitted rubber gasket. DE/NDE endbell fitted with sintered brass one-way drain.

Insulation and Inverter Rating

  • Class F insulation 
  • Designed to Class B temperature rise
  • Vacuum Impregnated         
  • Inverter Rated 20:1 Constant Torque (1.0 S.F. on VFD Power) per NEMA MG 1 Part 31 standards

CLOSE COUPLED PUMP MOTOR

CLOSE COUPLED PUMP MOTOR

Write Your Own Review
You're reviewing:Close Coupled Pump Motor
Your Rating

No Related Posts