Call Us toll Free 1-800-417-6568
Flat Rate Shipping On Phase Converters
Total Weight: 383.0000 lbs.
Idler Enclosure: Totally Enclosed Fan Cooled
If Ordered by 2PM
Operations Manual
The 15 HP Rotary Phase Converter - GP15NL includes a power block that provides a convenient way to manage your power distribution needs. It is UL listed, rated for copper or aluminum conductors, and Tin-plated. The power block that comes with the 15 HP Rotary Phase Converter - GP15NL comes with with safety covers for larger converters. This power block provides an easy connection, and is non-corrosive and oversized. We use this block with the consumer in mind. It makes your installation easy, fast, and secure.
Cast Iron Frame, Corrosion Resistant Hardware, Stainless Steel Connection Plate, Cast Iron Conduit Box, Over Sized Bearings, Cast Iron Inner & Outer Bearing Retainers, Vacuum Impregnated Windings, 4140 Steel Shaft Rotor Generator is made to preform in a wide range of environments and we prepare them for the task. From the cast iron frame and dual oversized bearings and seals. This generator is ready for the toughest environments.
The 15 HP Rotary Phase Converter - GP15NL features a 3 ½ inch display that allows you to either monitor your single phase voltage or your generated phase for consistency. Without opening up any covers and using a voltmeter you can always see that the digital phase converter is working properly for your equipment. It will shut on and off with your rotary phase converter.
Whether you are in a rural area or not, voltage drops or dips can occur, this will protect the component inside the 15 HP Rotary Phase Converter - GP15NL, it will also protect against overloading the digital phase converter for sale. This will help eliminate costly labor, material, and down time. Easy way to turn on the rotary phase converter without using a disconnect or breaker to power the 15 HP Totary Phase Converter - GP15NL, it also provides a level of safety, in the event you ever lose power, the digital phase converter will stay off when the power is restored.
Not a single rotary phase converter leaves our facility, unless it is absolutely perfect, no crossed wires, secure tied downs, all hand built and goes through a four level inspection process right before it is packaged and shipped. Heavy gauge wire and thick insulation, resistant to heat and moisture.
The indicating light is actually LED, consumes less power, much brighter, and last 1000 times longer then a traditional bulb.
| Add Push Button, Mag Starter & Voltmeter | No |
|---|---|
| Generator Enclosure | TEFC |
| Kilo-watt | 11.2 |
| KVA | 3 |
| Max Circuit Breaker | 80 |
| Minimum Wire Size | 6 |
| Max, Fuse Size | 80 |
| Min. Fuse Size | 30 |
| Minimum Wire to Generator | 8 AWG |
| Output Amperage | 21 |
| Minimum Service Required | 25 KVA |
| Voltage Output | 460 |
| Voltage Balance | +/- 2% |
| Minimum Wire to Load | based on load |
| Max Resistive Amps | 11 |
| Generator Frame | 254T |
| Frequency (Hz) | 50/60 |
| Product Quote | No |
| SEO Name | 15 HP Rotary Phase Converter - Single to Three Phase Converter |
From $2,325.49
To $2,498.92
15HP Phase Converter / Transformer Package - 230V Single Phase to 460V 3 Phase
