Our digital rotary phase converters are the most reliable, efficient, and quiet system on the market today. Use this tool to build your own phase converter that includes Bluetooth, WIFI, and an Internet Capable Computer. Our tool allows you to choose a horsepower rating, features, and voltage configuration This new unit saves you time, money, and hassle. This rotary phase converter will only run when your equipment needs power, and will standby waiting for a load again. Since this unit has AutoStart and AutoOff, you will be working without any background noise. In addition, you won’t be wasting any money on just letting the system sit idle.
You can set the rotary phase converter to shut off in a manner that fits your needs. Or, you can set this phase converter to remain running at all times. The team at Phoenix Phase Converters understands that you may be operating on a busy schedule and cannot afford downtime. So, we made this the most robust rotary phase converter for sale on the market. The computer that is integrated with the converter will monitor any potential hazards before they happen and correct itself to ensure you will never be left in the dark again. In addition, the digital rotary phase converter in this do-it-yourself (DIY) kit is designed to operate without a computer. This is the most intelligent phase converter for sale today that gets smarter as it progresses in new firmware.
Generator & Idler
The Generator & Idler that is available with our DIY digital rotary phase converter kit includes a cast iron frame, corrosion resistant hardware, stainless steel connection plate, and cast iron conduit box. The generator that is used with this digital phase converter for sale also features oversized bearings, cast Iron inner & outer bearing retainers, and vacuum impregnated windings. The 4140 Steel Shaft Rotor Generator is made to perform in a wide range of environments and we prepare them for the task. From the cast-iron frame and dual oversized bearings and seals, this generator is ready for the toughest environments.
As you are building your own phase converter, you can decide to add a 7" HD touchscreen display module and interface that is designed to make it easier to monitor the efficiency of the digital rotary phase converter. This digital phase converter for sale makes it easy to monitor all of your voltages, while the software will do it for you too. The software is designed to protect your rotary phase converter. It will monitor against high voltages and spikes, voltage drops or overloads, and diagnose the issue. This is the mostrobust and dependable phase converter for sale on the market today.
The computer in this do-it-yourself (DIY) rotary phase converter kit allows the user to set a timer to shut off the digital phase converter automatically. Move the timer to minutes or hours to set the total amount of time the phase converter should remain activated. Maybe you have a machine that needs to run a job for hours after you are done with the day. If this is the case, our digital phase converters for sale allow you to set a future time you want it to be activated. Simply program a schedule into the phase converter prior to leaving for the day.
Computer On Board
Our digital rotary phase converter features a computer that provides you with endless possibilities. Once you start building your own phase converter, you will have an option to add an interactive screen that is designed to interact with the computer and hardware. When attached, you will have on-screen controls to the phase converter with features such as auto shut-off, voltage meters, lockout passcode, and over-voltage or low voltage detection. This rotary phase converter also features Bluetooth and wireless access to the internet. You can control the phase converter with a wireless remote or your smartphone.
We use a terminal block with our digital rotary phase converter that is a convenient way to manage your power distribution needs. It is rated for copper or aluminum conductors and is tin-plated. This power block also includes safety covers on larger phase converters. The power block that is used with our digital rotary phase converter provides an easy connection and is non-corrosive or oversized. We developed this block with the consumer in mind, making your installation simple.
The digital rotary phase converter in our do-it-yourself (DIY) kit features a panel design that includes heavy-gauge steel and is powder-coated. This digital phase converter for sale also includes durable hinges and exceeds NEMA 3R standards. The system is easy to open for maintenance and installation. The removable top and bottom panels that can be replaced or removed for easier installation.
No glue or adhesive mess. The holders are very secure and place no stress on the capacitors. The holders are designed to make it easy to replace the capacitors. Even with the built-in technology these capacitors should last a lifetime and never need servicing.
We are neat freaks! Not a single rotary phase converter that you build will leave our facility unless it is absolutely perfect. Our digital rotary phase converter features no crossed wires, secure tie downs, and are hand built. Each phase converter for sale goes through a four level inspection process right before it is packaged and shipped. Heavy gauge wire and thick insulation, resistant to heat and moisture.
Totally Enclosed, Fan Cooled
The generator that is available with this rotary phase converter includes a cast iron frame, corrosion resistant hardware, stainless steel connection plate, cast iron conduit box, oversized bearings, cast Iron inner & outer bearing retainers, and vacuum impregnated windings. The 4140 Steel Shaft Rotor Generator is made to perform in a wide range of environments and we prepare them for the task. From the cast-iron frame and dual oversized bearings and seals, this generator is ready for the toughest environments.