CLICK HERE FOR HELP WITH SIZING THE RIGHT CONVERTER
- Rated for any environment, indoor/outdoor.
- Designed to work for voltage-sensitive equipment.
- INPUT: 208-250V - 50/60 hz Single Phase
- OUTPUT 208-250V - 50/60 hz Three Phase
- Download the manual below for, Dimensions, Size, Weight, Spec Sheet, and Wiring Diagram
- Voltage meter display
Flat Rate & Fast Shipping
Idler Motor will arrive by freight truck, the panel will arrive by FedEx.
Operations Manual
Generator/Idler
The 5 HP rotary phase converter comes with a Steel Shaft Rotor Generator that is designed to perform in a wide range of environments. The generator and idler feature a cast iron frame, corrosion resistant hardware, stainless steel connection plate, cast iron conduit box, oversized bearings, cast iron inner & outer bearing retainers, and vacuum impregnated windings. From the cast iron frame to the dual oversized bearings and seals, the 5 HP phase converter and generator are ready for the toughest environments.
Power Block
We use a terminal block that is a convenient way to manage your power distribution needs. UL Listed, rated for copper or aluminum conductors, Tin-plated, with safety covers on larger converters, Easy Connection, non-corrosive and oversized. We use this block with the consumer in mind, makes your installation easy, fast, and secure.
Totally Enclosed, Fan Cooled
Cast Iron Frame, Corrosion Resistant Hardware, Stainless Steel Connection Plate, Cast Iron Conduit Box, Over Sized Bearings, Cast Iron Inner & Outer Bearing Retainers, Vacuum Impregnated Windings, 4140 Steel Shaft Rotor Generator is made to preform in a wide range of environments and we prepare them for the task. From the cast iron frame and dual oversized bearings and seals. This generator is ready for the toughest environments.
Voltage Panel Display
Either monitor your single phase voltage or your generated phase for consistency, 3 1/2 inch, blue backlight, make it easy to see. Without opening up any covers and using a voltmeter you can always see that the 5 HP Rotary Phase Converter - GP5PL is working properly for your equipment. It will shut on and off with your phase converter.
Digital Protection & Push Button Control
Whether you are in a rural area or not, voltage drops or dips can occur. The components in the 5 HP phase converter are protected against overloading and other types of issues. This will help eliminate costly labor, material, and down time. It’s easy to turn on the rotary phase converter without using a disconnect or breaker to power the converter. It also provides a level of safety. If you lose power, the phase converter will stay off when the power is restored.
Wiring
We are neat freaks
Not a single 5 HP Rotary Phase Converter - GP5PL Single Phase to Three Phase Converter leaves our facility unless it is absolutely perfect. Our phase converters feature no crossed wires, secure tied downs, and go through a four level inspection process right before it they are packaged and shipped. Heavy gauge wire and thick insulation, resistant to heat and moisture.
Push Button Indicating Light
The indicating light is actually LED, consumes less power, much brighter, and last 1000 times longer then a traditional bulb.
