CLICK HERE FOR HELP WITH SIZING THE RIGHT CONVERTER
- Rated for any environment, indoor/outdoor.
- Designed to work for voltage-sensitive equipment.
- INPUT: 208-250V - 50/60 hz Single Phase
- OUTPUT 208-250V - 50/60 hz Three Phase
- Download the manual below for, Dimensions, Size, Weight, Spec Sheet, and Wiring Diagram
- Voltage meter display
Flat Rate and Fast Shipping
Idler Motor will arrive by freight truck, the panel will arrive by FedEx.
Operations Manual
Generator/Idler
The 7.5 HP Rotary Phase Converter - GP7PL is integrated with a 4140 Steel Shaft Rotor Generator that features a cast iron frame, corrosion resistant hardware, stainless steel connection plate, cast iron conduit box, over sized bearings, cast iron inner & outer bearing retainers, and vacuum impregnated windings. The generator is designed to perform in a wide range of environments and we prepare them for the task. From the cast iron frame and dual oversized bearings and seals. This generator is ready for the toughest environments. Test:

Power Block
We use a terminal block that is a convenient way to manage your power distribution needs. The power block that is available with the 7.5 HP Rotary Phase Converter - GP7PL is UL Listed, rated for copper or aluminum conductors, Tin-plated, easy to connect, non-corrosive and oversized. Large phase converters are equipped with a terminal block that includes safety covers. We use this block with the consumer in mind, makes your installation easy, fast, and secure.

Totally Enclosed, Fan Cooled
Cast Iron Frame, Corrosion Resistant Hardware, Stainless Steel Connection Plate, Cast Iron Conduit Box, Over Sized Bearings, Cast Iron Inner & Outer Bearing Retainers, Vacuum Impregnated Windings, 4140 Steel Shaft Rotor Generator is made to preform in a wide range of environments and we prepare them for the task. From the cast iron frame and dual oversized bearings and seals. This generator is ready for the toughest environments.

Voltage Panel Display
The 3 1/2 incch screen on the 7.5 HP Phase Converter - GP7PL makes it easy to monitor your single phase voltage or your generated phase for consistency. Without opening up any covers and using a voltmeter you can always see that the phase converter is working properly for your equipment. It will shut on and off with your phase converter.

Digital Protection & Push Button Control
Whether you are in a rural area or not, voltage drops or dips can occur. The electrical components in the 7.5 HP Phase Converter - GP7PL are designed to protect the system from overloading and other types of issues. This will help eliminate costly labor, material, and down time. Easy way to turn on the phase converter with out using a disconnect or breaker to power the phase converter, it also provides a level of safety, if the event you ever lose power, the phase converter will stay off when the power is restored.

Wiring
We are neat freaks
Not a single phase converter leaves our facility, unless it is absolutely perfect, no crossed wires, secure tied downs, all hand built and goes through a four level inspection process right before it is packaged and shipped. Heavy gauge wire and thick insulation, resistant to heat and moisture.

Push Button Indicating Light
The indicating light is actually LED, consumes less power, much brighter, and last 1000 times longer then a traditional bulb.