480-240 Volt 3 Phase Electrical Transformers - 30

$2,628.56

In StockIn StockOut of stock
Order in the next to get it between and hoursminutes
Out of stock

american expressapple paydiscovergoogle paymasterpaypalshopify payvisa
SKU: 480-240V3P-30N/ACategories: 480-240/120 3 PH Transformers, Transformers

High Voltage Amps: 18.0

Low Voltage Amps: 36.1

Dimensions (inches): 28 X 21 X 14


About the 480-240 Volt 3 Phase Electrical Transformer-15

The 480-240 Volt 3 Phase Transformer-15 is equipped with an electrostatic shield and windings to meet the requirements of your unique application. The 3 phase electrical transformers are safe and efficient to use in commercial environments. The 480-240 Volt 3 Phase Electrical Transformer-15 features a 60 Hz rating and a Seismic Zone IV Compliant certification.

How a Three Phase Transformer Operates

3 phase electric transformers feature 3 interchanging voltages that vary in phase by 120 degrees. The 480-240 Volt 3 Phase Transformer-15 is equipped with a total of 3 single phase windings that are integrated with a single core. The output of this type of transformer is able to be produced by configuring an individual 3 phase transformer or by connecting 3 single phase transformers.

A majority of organizations decide to invest in a single 3 phase transformer instead of 3 separate single phase transformers because they feature a compact design and are easier to install. In addition, the copper and iron cores are more efficient with a 3 phase transformer configuration. The primary and secondary windings of a 3 phase power transformer are engineered to be integrated in various configurations to meet the requirements of your application.

Types of Transformer Connections

The 3 types of integrations that can be created by the 480-240 Volt 3 Phase Electric Transformer-15 are Wye (Star), Zig-Zag (Interconnected Star), and Mesh (Delta). A 3 phase power transformer features a total of 3 primary and secondary windings that are designed to be connected in a variety of ways. The windings can be integrated to resemble Delta or Star shapes. To determine the correct type of connection, you will be required to inspect the 3 voltages that are separated by 120 degrees.

To ensure your configuration is organized correctly, it’s important to assign letters to the 3 primary windings on a 3 phase electrical transformer. Letters such as A, B, and C are utilized to identify various types of phases including Red, Yellow, and Blue. Always use uppercase letters to identify the primary windings of a transformer. On the other hand, the secondary windings of a 3 phase transformer are identified with the lowercase letters a, b, and c.

Transformers Are Designed to Modify Voltage Levels

The 480-240 Volt 3 Phase Transformer-15 is engineered to circulate electricity to 3 phase systems such as electric motors. Electric transformers are constructed to modify voltage levels before the electricity reaches its destination, such as a piece of hardware or a motor in a warehouse. 3 phase electrical transformers are utilized by operators to boost or decrease voltage that is being distributed to hardware.If a transformer is used to increase the voltage, the increase is referred to as stepping up the voltage. On the other hand, a transformer that is utilized to decrease voltage levels is referred to as stepping down the voltage.

Prevent Energy Loss

Electricity loses a small amount of energy as it is distributed from a single source to a different location. To prevent energy loss, electrical distribution centers utilize single and 3 phase power transformers to increase the voltage of electricity before it is circulated. Less energy is wasted during the distribution cycle when the voltage is high. To prevent the loss of energy, a Step Up Transformer is used to increase the voltage before it’s circulated to commercial facilities or houses. When the voltage reaches a residential neighborhood, the electrical supplier will utilize a transformer to decrease the voltage of the electricity before it reaches your household. A transformer that is designed to decrease voltage is referred to as a Step Down Transformer.

STANDARD FEATURES

  • Doe 10 CFR Part 431 Energy Efficiency
  • UL 506, UL 1561 Listed
  • Aluminum Windings
  • 60 Hz
  • Electrostatic Shield
  • Min. 60 dB Common Mode Noise Attenuation (Single Shield)
  • 150 C Temperature Rise
  • ANSI C57.12.01
  • Seismic Zone IV Compliant
Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

480-240 Volt 3 Phase Electrical Transformers - 30

$2,628.56